Brass has multiple uses in household and industrial applications. The electrical and plumbing industries are the biggest consumers of brass products. In the electrical industry, brass is used to craft plug pins, neutral or terminal bars, earthing links, etc. Similarly, in the plumbing industry, brass is used to create hardware like taps, connectors, hinges, etc.
Electrical and plumbing industries have one common name in their list of brass components and that is a connector. Though the usage of an electrical connector and a plumbing connector is poles apart. But, the manufacturers of brass connectors India are the common link. In the plumbing industry, brass fittings or connectors are classified as:
- Union Tees: A brass tee resembles the English alphabet “T” and that is where it derives its name from. A brass tee has three openings which threaded and non-threaded edges depending on the usage and requirement. Tees are made from a variety of material like steel, brass, etc. So, a manufacturer of brass connectors India will have plethora of options for you to choose from.
- Crosses: A cross connector resembles the English alphabet “X” or a cross with four sides of possible connections. Again, the ends can be threaded or non-threaded. The width of the connector varies on the requirement. For example, a cross connector required for gas fittings would be narrow and a connector for water fittings would be broad.
- Couplings: A coupling can be explained as a pair of connectors that word in conjunction with each other. Usually one end is threaded and other has rings to fit in the threaded section. They are usually created from various materials like aluminum, plastic, steel and brass. But, the brass couplings are the most popular of the lot.
- Elbows: Elbows are connectors that resembles English alphabet “L” where both the sections are almost the same length. This usually acts as a side segment. This is open from two sides and is use often in connection pipes when a turn is involved. Again, like other brass fittings, elbows are crafted from various metals and non metals but the brass variation is the popular one.
You would have noticed that each type of connector has at least two openings because the purpose of a connector is to join two or more pipes. But, there would be times when you would need to have a closed-end and only one end needs a connection, manufacturers of brass connectors India offer a solution for that as well. There is a cap that can be fitted on the side from where you want to eliminate the possibility of flow.
There are a whole lot of brass fittings and some industry specific terminologies like tees, elbows, couplings, and crosses. While this blog focused on the shapes of connectors, watch out this space for details on other aspects of brass connectors which includes briefs on threaded and non-threaded fittings, male and female connectors, brass nipples, terminal bars, etc. If there is anything specific you would like to know about, leave the details in the comment section.
Read More: